Samsung gx10 manual pdf

A new report from the trusted media has mentioned almost all about Samsung Galaxy S It is worth to see the information about this upcoming product. Below is the information about the Samsung Galaxy S10 release date, specs, and rumor that you should know.

The Samsung Galaxy S10 to be released in-store on March 8th, Pre-orders will take place either February 20th until March 7th, likely the former.

Both the chips would be produced using the 7nm manufacturing process, meaning they would be faster and more energy efficient than their respective predecessors. Page 80 Using the White Balance 7. The menu as shown will display. The position of Custom white balance can be changed by the real e-dial. You can select a desired white balance by using the four way controller 8.

Press the OK button and the White Balance adjustment menu will display. Press the OK button again to save the setting. Use the four-way controller. Use the four-way controller balance. Page 82 Using the White Balance 5. Use the four-way controller Balance. Seven levels and patterns are available on the G-M and B-A axes. The sensitivity can be set to [Auto] or within a sensitivity range equivalent to ISO to The sensitivity is automatically corrected in the range of [ISO ] by default.

Refer to the software instructions for details. Press the button after taking a picture. Press the four-way controller : The previous image appears. The most recently captured image image with the largest file number is displayed on the LCD monitor. Image rotation information is saved. Press the button and use the four-way controller to select an image. Page 88 Playing Back Still Pictures 2. Turn the e-dial to the right toward Image enlarges at each calibration and can be enlarged to 20 times the original.

The following buttons act as : - Four way controller - Rear e-dial Right : enlarges the image Max. Turn the rear e-dial to the right towards button. A full screen display of the selected image appears. Selecting the Number of Images to Display 1. In the multi-image display screen, press the Fn button. The multi-image options screen appears.

To start continuous playback, use the menu screen displayed on the LCD monitor. Press the button and use the four-way controller select an image to be displayed first. Page 92 Playing Back Still Pictures 3. Start screen is displayed and slideshow begins. Make sure that both the TV and the camera are turned off before connecting the cable.

Processed images are saved under a different name. Press the Fn button in Playback mode. The screen for selecting the filter appears.

Page 95 Playing Back Still Pictures 3. Use the four-way controller Select a filter and preview the effects on the image. Set a desired filter by using the front and rear e-dial. Adds a vintage touch to photos by converting them Sepia to sepia color.

Adds a colour filter to the image. Select a RAW file in Play mode. Protected images cannot be deleted. Press the button and use the four-way controller to select an image to delete. Press the button twice. The Delete All screen appears. Use the four-way controller to select [Delete All].

Only files in the same folder can be selected at once. Page Deleting Images 3. Use the four-way controller to delete and press the OK button. Image is selected and appears. Press Fn button to select all images the selection of images may take time to complete depending on the number of images. Press the button and use the four-way controller to select images to delete.

The Delete screen appears. Even protected images are deleted if the Memory Card is formatted. The most recently captured images image with the largest file number are displayed first on the LCD monitor.

The Protect all images screen appears. Press the four-way controller to select [Protect] and press the OK button. All images saved in the Memory Card are protected. Select [Unprotect] in Step 3 to cancel the Protect setting on all of the images.

Use the four-way controller controller. The frame moves to [Date]. Use the four-way controller the date or not : The date will be imprinted. The DPOF screen appears. The screen for making DPOF settings for all images appears. After connecting the camera to the printer, select the images you want to print, the number of copies and whether to insert the date or not. Press the MENU button. Use the four-way controller menu. A pop-up menu appears.

Use the four-way controller 6. The setting is changed. Connecting the Camera to the Printer 1. Turn the camera off. Turn the printer on. After printer start-up is complete, turn the camera on. The PictBridge menu appears. Printing Single Images 1.

Use the four-way controller PictBridge menu. Page Printing Using PictBridge 3. Use the Fn button to choose whether to insert the date : The date will be printed. Use the four-way controller You can only choose a size that is supported by your printer. When the Paper Size is set to [Standard], images are printed according to the printer settings. Choose the number of copies and whether to imprint the date or not. The number of copies and the date setting that you choose apply to all of the images.

Use the four-way controller 2. Use the four-way controller for each image, whether the date is imprinted or not, and total number of copies. Page MEMO Using the Menu Using the Fn Menu Using the Mode Dial When using menus and Fn menu, items which cannot be changed due to camera settings appear gray and cannot be selected.

Displaying the Menu screen 1. Use the four-way controller - Press the front e-dial to move the menu page by page. Item Image Tone Sets the colour tone of pictures. File type Sets the image file type. Recorded Pixels Sets the recording size of images. Quality Level Sets the image quality. The default setting is Bright. Natural Images are finished naturally and suitable for retouching.

Bright Images are finished brightly, with high contrast and sharp focus. The default setting is JPEG. When the file format is changed, the number of recordable images appears at the top right of the screen. Captures images in JPEG format. When the number of recorded pixels is changed, the number of recordable images appears at the top right of the screen. The default setting is [0 Standard ] for all.

Saturation Sets the colour saturation. Sharpness Makes the image outlines sharp or soft. Contrast Sets the image contrast. Press the OK button and the information is saved on the User mode. The default setting is [sRGB]. Three pictures are saved with each shot.

Extended Bracket and Multi-exposure cannot be used together. The last mode selected is set. Press the Delete button create again from the first picture. The default setting is [Off]. Exposure is set separately from AF point. Exposure is set in accordance with AF point. The default is [Off]. AF does not activate at shutter release from remote control when [Off].

AF activates if shutter is released from remote control when [On]. The default is [On]. Performs AF when the shutter release button is pressed halfway. Does not perform AF when the shutter release button is pressed halfway.

The default setting is [10 sec]. Choose normal Program line or one of the following. The default is [Normal]. Normal Normal program is the basic Automatic Exposure Program. Hi-speed priority program is an Automatic Exposure Program that selects H.

Speed higher shutter speeds. AWB fine tuning is not available. The AWB fine tuning is available. The default is [Kelvin]. Kelvin Sets the colour temperature by K. Sets the Colour temperature by 20 Mired. Mired The figures are converted to Kelvin and displayed.

Set a sensitivity that is not regularly used to avoid forgetting to reset when sensitivity is raised. ISO warning is not displayed by default. ISO warning is not displayed.

The default is [1 EV Step]. Selects the exposure adjustment method when the Green mode Green Button in M button is pressed in an M mode. Sets to enable shutter release when lens aperture ring is set at Use Aperture Ring other than A Auto.

The aperture is locked and the shutter speed is adjusted automatically. The shutter can be released even if the aperture ring is not set to the A Auto position. The default is [1time]. Continue The setting is retained when the RAW button is pressed again. Pictures cannot be taken while the flash is re-charging. Pictures can be taken while the flash is re-charging.

The default is [1. Initial magnification of [1. Saves the rotation information when shooting. Does not save the rotation information when shooting. The default is [Cancel]. Reset The settings will reset. Cancel The settings will not reset. Item Format Formats the Memory Card. World Time Allows the display of local time when traveling abroad. Formatting will delete all the data on the Memory Card. Format A [Formatting] message appears and the memory will be formatted.

Cancel The memory will not be formatted. The default setting is [On]. You can also set the display style. Setting [World Time] enables you to display the local date and time on the LCD monitor when travelling overseas. Page Using the Menu 7. Use the four-way controller The current time, location and time difference of the selected city appears. Use the four-way controller to select [DST]. Adjust settings when the LCD monitor is hard to see. What is the screen size of the Samsung GX?

The screen size of the Samsung GX is 2. What is the height of the Samsung GX? The Samsung GX has a height of What is the width of the Samsung GX? The Samsung GX has a width of mm. What is the depth of the Samsung GX? The Samsung GX has a depth of mm. Is the manual of the Samsung GX available in English?

Yes, the manual of the Samsung GX is available in English. Digital Camera. USB 2.